Easy‑Install Split Golf Ferrules (No Clubhead Removal Required)
Overview
- No clubhead removal. The split design slips on.
- 15 to 20 ferrules per pack plus a clamp that holds the ferrule while the glue cures, shaft epoxy, sandpaper and a how-to video.
- Beginner friendly, with extras in the pack for practice and mistakes.
- Durable ASA, clean premium look once sanded and wiped.
- Custom logos, initials or colors by email or text.
Common questions
Do I have to pull the head?
No. That is the point of the split design.
Why are they rough out of the pack?
They are straight off the printer. A light sand and a wipe gives a smooth, polished look; the video shows it.
Specs
| Material | ASA |
|---|---|
| Finish | Unfinished off the printer; cleaned, lightly sanded and wiped, the layer lines fade and the surface shines |
| Quantity | 15 to 20 per pack, extras for practice |
In the box
- 15 to 20 custom split ferrules
- Ferrule-holding clamp
- Golf shaft epoxy
- Sandpaper
- Installation video link
You need: a box cutter or hobby knife, isopropyl alcohol, acetone, rubber gloves, paper towels. Optional: a shaft clamp or vise, a heat gun or lighter used carefully.
Reviews
No reviews yet. Be the first.
Write a review
Full details
Easy‑Install Split Golf Ferrules (No Clubhead Removal Required)
Upgrade your irons with custom 3D‑printed split ferrules designed for fast, clean installation without removing the clubhead. Each pack includes 15–20 ferrules plus a precision‑designed clamp that holds the ferrule in place while the glue cures. Full how‑to video included: https://youtu.be/XSY_ET0cBsA?si=EPUjCDchhEfxs5uF
Choose from our growing selection of split ferrule designs, or contact us via email or text for custom logos, initials, or color schemes.
What’s Included:
• 15–20 custom split ferrules
• Ferrule‑holding clamp. • Golf shaft epoxy
• Sandpaper
• Installation video link
What You’ll Need:
• Box cutter or hobby knife
• Isopropyl alcohol
• Acetone (nail polish remover works)
• Rubber gloves
• Paper towels or shop rags
• Optional: shaft‑holding clamp or vise
• Optional: heat gun or lighter (used carefully)
Why These Ferrules Stand Out:
• Split design = no head removal
• Beginner‑friendly installation
• Low‑cost way to customize irons
• Durable ASA material with a clean, premium look
• Perfect for personal builds or customer upgrades
• Custom logo and color options available
Additional information
• These ferrules are unfinished right off the printer. Once cleaned up, lightly sanded, and wiped down, the surface shines and the layer lines fade, giving you a smooth, polished, professional look.
• Each pack includes extra ferrules so you can practice the installation process and have room for mistakes without needing to reorder.